The thermostat in your Chevrolet S-10 is straightforward to entry. The best option to find the thermostat is by tracing the highest radiator hose. The highest hose is mounted on the thermostat housing assembly. The Chevrolet S-10 doesn’t require you to take the hose off to entry the housing. You must exchange the thermostat if you discover your truck is overheating and there are not any seen coolant leaks. That is the usual first step in troubleshooting your S-10′s coolant system.
Chevy S-10 Thermostat Installation Instructions
Remove the Outdated Thermostat
1. Open the hood to entry the engine compartment. Hint the highest radiator hose from the radiator to the engine.
2. Find the two bolts on the high of the housing to which the hose is clamped. The thermostat is situated within the housing.
3. Unbolt the nut with a socket wrench. There shall be floor wires sharing the stud. Unscrew the remaining bolt with a socket wrench.
4. Pull the housing cowl off along with your fingers. This gives you entry to the thermostat. Pull the thermostat out together with your fingers. Remember the place the thermostat was sitting within the housing so you set the brand new thermostat in accurately. Discover whether or not the spring was going through the housing cowl or the engine.
5. Clear the housing floor with a putty knife or a razor blade. Scrape all of the remaining gasket materials off each the duvet and the housing.
Install the New Thermostat
6. Place the brand new thermostat within the housing. Guarantee it goes in the identical means the outdated thermostat was positioned earlier than removing.
7. Place the brand new gasket across the surface of the thermostat housing. Make sure the gasket traces as much as the stud and the bolt gap on the housing.
8. Place the quilt onto the housing. Tighten the bolt with a socket wrench. Place the ground wires onto the stud and tighten the nut with a socket wrench.
9. Open the radiator cap to entry the coolant level. Test to make sure the coolant is full. The coolant must be seen on the neck of the radiator.
Read more : How to Install a Thermostat for a Chevy S-10
